Our 1/4" thick teak stock is useful for a variety of small projects, including trim slats and edge banding for plywood that's more substantial than our teak veneer strips.

These 1/4" teak strips are milled from the same First European Quality (FEQ) Asian teak as our regular dimensional lumber, and specified thickness, widths and lengths are actual, not nominal.

Specifications

• Minimum order quantity: 3 pieces
• 1/2", 3/4" & 1-7/8" widths
• 1' - 2' - 3' - 4' - 5' lengths
• Surfaced all 4 sides

Specifications

• 3/8"
• 1/2"
• 1" Nominal
• 2" Nominal

Teak Lumber Shipping Costs

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- If the actual shipping & handling cost is less than the estimated cost you're charged when placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the difference.

Package Length Really Matters

Shipping costs for teak boards sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains thin, narrow boards and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order order shows up in excellent condition.

Convenient solution for edge-banding teak veneer plywood. This edge-banding consists of flexible teak veneer that's backed with heat-activated adhesive. The edge-banding can be installed using an ordinary clothes iron to activate the adhesive. Then you can simply trim off any excess material using a razorblade-type knife.

We sell this edge-banding veneer in 10' lengths. Free shipping to all 50 states, Puerto Rico & the U.S.V.I.

Other Project Panel Sizes:

1'x1'|1'x2'|1'x3'|2'x2'

Six Square Feet (24" x 36") Teak Veneer Plywood Panels -- 6 sq. ft. 1/8" & 1/4" thick panels have FEQ teak veneer on one side only; 1/2" & 3/4" thick panels are veneered on both sides. Plywood substrate is exterior grade.

Other Project Panel Sizes:

1'x1'|1'x2'|1'x3'|2'x3'

Four Square Feet t (24" x 24") Teak Veneer Panels -- 4 sq. ft. 1/8" & 1/4" thick panels have FEQ teak veneer on one side only; 1/2" & 3/4" thick panels are veneered on both sides. Plywood substrate is exterior grade.

3/4" Ply Backordered 4/10

Other Project Panel Sizes:

1'x1'|1'x2'|1'x3'|2'x2'

Three Square Feet (12" x 36") Teak Veneer Panels -- 3 sq. ft. 1/8" & 1/4" thick panels have FEQ teak veneer on one side only; 1/2" & 3/4" thick panels are veneered on both sides. Plywood substrate is exterior grade.

3/4" Ply Backordered 4/10

Other Project Panel Sizes:

1'x1'|1'x3'|2'x2'|2'x3'

Two Square Feet (12" x 24") Teak Veneer Panels -- 2 sq. ft. 1/8" & 1/4" thick panels have teak veneer on one side only; 1/2" & 3/4" thick panels are veneered on both sides. Plywood substrate is exterior grade.

3/4" Ply Backordered 4/10

Other Project Panel Sizes:

1'x1'|1'x3'|2'x2'|2'x3'

One Square Foot (12" x 12") Teak Veneer Panels -- 1/8" & 1/4" thick panels have FEQ (First European Quality) teak veneer on one side only; 1/2" & 3/4" thick panels are veneered on both sides. Plywood substrate is exterior grade.

3/4" Ply Backordered 4/10

Two Square Feet (1' x 2') Teak Veneer Panels

• 1/2" thick panels veneered on both sides with First European Quality (FEQ) teak over an exterior-grade core.
• The grain on these panels runs parallel to the 12" dimension, as shown above.
• Panel length & width may vary +/- 1/4".
• These panels are suitable for interior use aboard your vessel or on land.

We have several of these panels available, and all are in new condition at 25% off our normal retail price.

One Square Foot (12" x 12") Teak Veneer Panels -- These 3/4" thick panels are veneered on both sides with First European Quality (FEQ) teak. The plywood substrate is exterior grade, and these project panels are fine for interior use aboard your vessel on on land.

We have several of these 1 sq. ft. panels available, and each is in new condition. Dimensions may vary by up to 1/4".