Stand Up Paddle Board Racks For Docks, Piers Or Any Level Surface

• Stand-alone racks for 1, 2 or 3 paddle boards up to 4.5" thick.
• Easy installation on docks or other level surfaces with fasteners, or...
• NEW -- With our optional support arms, free-standing installation on docks, garage floors, lawns or similar level surfaces with no fasteners needed.
• Weatherproof, no-maintenance marine-grade King Starboard construction.
• Bungee tie-downs included for your SUPs and paddles.
• Rack cutouts accept cable locks & chains for theft deterrence.
• Free shipping In The Contiguous States (For shipping rates to Alaska, Hawaii, Puerto Rico, U.S. Virgin Islands or Guam, contact us.)
• Designed and built in Marathon, Florida Keys.
• Usually ships within 1 business day.
• $20 Discount For Orders Over $200
• $50 Discount For Orders Over $500

Buck Woodcraft designed these stand up paddle board racks to offer easy storage for standard SUPS up to 4.5" thick on your dock, pier or anywhere else convenient to the water. Our racks cradle SUPs securely off the ground or dock, yet require minimal lifting when stowing or unshipping your boards for a day on the water. We also offer storage racks for SUPs with thicker hulls, such as touring & racing SUPs.

Weatherproof, No-Maintenance Marine Polymer.

We make our SUP racks from 3/4" thick King Starboard and assemble them with all stainless steel fittings. Starboard is a high-tech, marine-grade plastic that stands up to salt water and sun better than just about any other material you'd care to name -- which means it won't

"Just received the SUP stands and all I can say is: What a great product!

"...now that I have them -- and am using them -- I definitely see the value."

--Philipp Harper - West Palm Beach, Florida

rot, warp, crack, rust or color-fade after years of exposure. In short, you can install these racks and basically forget them, so far as maintenance is concerned.

Sturdy Bases, Easy Mounting.

Our SUP rack bases are pre-drilled at all 4 corners for easy mounting using the fasteners of your choice. If you're going to mount them on your dock, moderate size wood screws or small lag bolts will work just fine.

Optional Support Arms Offer Free-Standing, No-Fasteners Installation.

If you'd rather not install your SUP rack permanently, we offer optional cross-brace support arms that basically triple the footprint of our rack bases. This means you can place your SUP rack on most level surfaces -- including docks, garage floors, lawns, patios etc -- and they'll be nice and stable. A set of 4 braces is $39.95, and each support arm installs with a single screw.

Built-In Paddle Storage, Bungee Tie-Downs, Cable-Lock Openings.

Our SUP racks all come with bungee tie-downs for securing paddle boards (and paddles) firmly in place. The racks also incorporate cut-outs for looping cable locks or vinyl coated security chains around your SUPS to guard against theft.

4 Colors, 3 Sizes. Multiple Uses.

Buck Woodcraft's SUP storage racks are available in your choice of 4 colors at no additional cost. And you have your choice of racks for storing 1, 2, or 3 stand up paddle boards in the location of your choice.

And not least, these racks also store similar-sized items such as surf boards and wind surf boards -- so you can mix and match how you stow your water toys with ease.

Wall-Mounted SUP Racks | Touring SUP Racks

Dock SUP Rack Features:

• Fabricated using 3/4" thick King Starboard & stainless steel fasteners, these paddleboard storage racks are sturdy and impervious to weather.
• All models include storage for each board's paddle.
• All models include bungee tie-downs for added security.
• Rack measurements are:
  • 1 SUP Rack - 4"W Base x 15.50"L x 20.50"H
  • 2 SUP Rack - 4"W Base x 23.25"L x 20.50"H
  • 3 SUP Rack - 4"W Base x 32.50"L x 20.50"H
• All rack bases are pre-drilled at the corners for fasteners of your choice. Mounting holes can be drilled to accommodate larger fasteners or tent spikes if required.
• Storage slots taper from 5-3/8" wide at the top to 4-1/2" at the bottom, then form a gentle curve for the board's edge to rest on.
• Maximum storage depth is 17".

What's In The Box?

• Two (2) SUP rack sides.
• Two (2) integrated bungee hold-down cords

Color Options:

Touring & Racing Paddle Board Racks For Docks, Piers Or Any Level Surface.

• Free-standing storage racks for 1 or 2 paddle boards up to 7.5" thick.
• Easy installation on docks, piers or any other level surfaces, with or without fasteners.
• Maintenance-free King Starboard marine-grade plastic -- weatherproof & colorfast.
• Bungee tie-downs included for your SUPs and paddles.
• SUP rack cutouts accept cable locks & chains for theft deterrence.
• Free shipping In The Contiguous States (For shipping rates to Alaska, Hawaii, Puerto Rico, U.S. Virgin Islands or Guam, contact us.)
• Designed and built in Marathon, Florida Keys.
• $20 discount on orders over $200
• $50 discount on orders over $500

Storage For Larger Stand Up Paddle Boards.

Buck Woodcraft now offers racks that accommodate touring SUPs up to 7.5" thick, providing easy storage on your dock or anywhere else convenient to the water. These free-standing storage racks cradle touring SUPs securely off the ground or dock, yet require minimal lifting when stowing or unshipping your boards for a day on the water.

Weatherproof, Maintenance-Free Marine Polymer.

We make our touring touring/racing SUP racks from 3/4" thick marine-grade King Starboard and assemble them with all stainless steelfittings -- and they stand up to fresh or salt water and sun better than just about any other material you'd care to name. That means they won't rot, warp, crack, rust or color-fade after years of exposure.

Sturdy Bases, Easy Mounting.

Our touring SUP rack bases are pre-drilled at all 4 corners for easy mounting using the fasteners of your choice. If you're going to mount the racks on your dock, moderate size wood screws or small lag bolts will work just fine. You can also mount these stands on bare ground, using extra-long tent spikes to provide the necessary holding strength. You can also place them on an even surface (such as a garage floor) and they'll hold your SUPs pretty well with no mounting hardware at all.

For information about our other SUP rack designs, click these links:

Wall-Mounted SUP Racks | Dock Racks For Standard SUPs

Features:

• Fabricated using 3/4" thick King Starboard & stainless steel fasteners, our touring SUP paddleboard storage racks are sturdy and impervious to weather.
• Built-in storage for paddles.
• Bungee tie-downs included for added security.
• Rack measurements are:
  • 1 SUP Rack - 4"W Base x 18"L x 20+"H
  • 2 SUP Rack - 4"W Base x 30"L x 20"H
• Storage slots taper from 8-1/2" wide at the top to 7-1/2" at the bottom.
• Rack bases are pre-drilled at the corners for fasteners of your choice.

Color Options:

It's not a bad idea to have a spare set of bungee tie-down cords handy for your SUP rack, just in case one or two ever break or get lost somehow.

So we have them ready to go, for every size and style of SUP rack we sell. Prices shown are per pair of bungees, with free shipping:

Standard SUP Racks For Docks:

• 1 SUP Rack -- $10.95
• 2 SUP Rack -- $11.95
• 3 SUP Rack -- $13.95

Touring SUP Racks For Docks:

• 1 SUP Rack -- $11.95
• 2 SUP Rack -- $13.95

Wall-Mounted SUP Racks:

• 1 SUP Rack -- $11.95
• 2 SUP Rack -- $13.95

Buck Woodcraft's stand up paddle board racks offer compact SUP storage on interior or exterior walls.

Weatherproof, No-Maintenance Marine Polymer. We make our SUP racks from 3/4" thick King Starboard and assemble them with all stainless steel fittings. Starboard is a high-tech, marine-grade plastic that stands up to the elements better than just about any other material you'd care to name -- which means it won't rot, warp, crack, rust or color-fade after years of exposure. In short, you can install these racks and basically forget them, so far as maintenance is concerned.

Sturdy Bases, Easy Mounting. Our SUP rack bases are pre-drilled at all 4 corners for easy mounting using the fasteners of your choice. We strongly recommend that you mount them into wall studs, and definitely not into unsupported drywall or similar panels. And if your board or boards are particularly heavy, you can support them even more securely by adding another set of fasteners in the upper third of the racks' mounting bases.

Built-In Paddle Storage, Bungee Tie-Downs, Cable-Lock Openings. Our wall-mount SUP racks include bungee tie-downs for securing paddle boards (and paddles) firmly in place. The racks also incorporate cut-outs for looping cable locks or vinyl coated security chains around your SUPS to guard against theft.

4 Colors, 2 Sizes. Our standard SUP storage racks are White/White, but you can choose any of 4 optional colors at no additional cost.

For information about our other SUP rack designs, click these links:

Sup Racks For Docks | Touring Sup Racks

Wall-Mount SUP Rack Features:

• Fabricated using 3/4" thick King Starboard & stainless steel fasteners, these paddleboard storage racks are sturdy and impervious to weather.
• Both models include storage for each board's paddle.
• Both models include bungee tie-downs for added security.
• Rack measurements are:
• 1 SUP Rack - 4"W Base x 15.50"H x 22-1/8" From Wall
• 2 SUP Rack - 4"W Base x 23.25"H x 22-13/16" From Wall
• Rack bases are pre-drilled at the corners for fasteners of your choice. Additional mounting holes can easily be drilled for added support.
• Storage slots taper from 5-3/8" wide at the outermost edge to 4-1/2."

Color Options:

White/White

SanShade

Dolphin Gray

Black