Teak Wire Molding - Whitecap/AFI 60860 -- Widest Dimension: 1-3/4". Thickest Dimension: 1/2". This molding can be mounted with either side down, depending on your specific requirements.

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

Convenient solution for edge-banding teak veneer plywood. This edge-banding consists of flexible teak veneer that's backed with heat-activated adhesive. The edge-banding can be installed using an ordinary clothes iron to activate the adhesive. Then you can simply trim off any excess material using a razorblade-type knife.

We sell this edge-banding veneer in 10' lengths. Free shipping to all 50 states, Puerto Rico & the U.S.V.I.

Teak Batten - 1-3/16" Wide - 60859 -- Dimension A: 3/8". Dimension B: 1-7/16"

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Small Quarter Round 60851 -- Measurements: Dimension A: 3/8". Dimension B: 3/8".

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Large Quarter Round 60850 -- Measurements: Dimension A: 1/2". Dimension B: 1/2".

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Extra Large Quarter Round 60849 -- Measurements: Dimension A: 3/4". Dimension B: 3/4".

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Pin Rail 60705 -- Standard pin rail is intended to be installed directly atop shelves and/or counters, and provides a fiddle height of more than 2-1/2".

Height: 2-9-16". Depth/Width: 7/8". Per 5' length.

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Ell-Type Pin Rail 60703 -- Ell-type pin rail extends down the front exposed edge of shelving or counters, providing a more finished looking (and potentially stronger) installation. Installed fiddle height is the same as for our standard pin rail -- over 2-1/2".

Overall Height: 3-9-16". Installed Height Above Shelf 2-9/16". Depth/Width: 7/8". Per 5' length.

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Large Stop Molding 60853 -- Dimension A: 3/8". Dimension B: 3/4" Dimension C: 13/16

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Large Ell Molding 60843 -- Each "arm" of our Whitecap large ell molding is 3/8" thick. Other measurements are: Dimension A: 1-3/16". Dimension B: 1-3/16" Dimension C: 13/16

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Molding 60847 -- This rail stands 3/4" higher than our standard rail molding, delivering a high-profile fiddled edge for bunk cushions, galley counters and similar applications.

Overall height 2-3/8". Overall width 13/16". Cutout 5/16" x 7/8". Per 5' length.

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Molding 60825 -- Excellent for providing a low-profile fiddled edge for 3/4" thick teak veneer plywood and similar applications.

Overall width 1-3/16". Overall depth 5/8". 3/4" x 1/4" cutout. Per 5' length.

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5" Straight-Length Molding 60821 -- Excellent for providing a low-profile fiddled edge for 1/2" thick teak veneer plywood and similar applications.

Overall width 7/8". Overall depth 5/8". 1/2" x 1/4" cutout. Per 5' length.

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

Teak Batten - 7/8" Wide - 60860 -- Dimension A: 3/8". Dimension B: 7/8"

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

Teak Batten - 1-7/16" Wide - 60858 -- Dimension A: 3/8". Dimension B: 1-7/16"

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

Teak Batten - 1-7/8" Wide - 60857 -- Dimension A: 3/8". Dimension B: 1-7/8"

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

Teak Batten - 3" Wide - 60855 -- Dimension A: 3/8". Dimension B: 3"

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Large Ell Molding 60844 -- Each "arm" of our Whitecap large ell molding is 1/4" thick. Other measurements are: Dimension A: 7/8". Dimension B: 7/8" Dimension C: 5/8"

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Molding 60835 -- A handsome molding that provides a fairly low-profile fiddled edge for cabin tables, counters and similar applications.

Overall height 1-3/8". Overall width 13/16". Cutout 5/16" x 7/8". Per 5' length.

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.

5' Straight-Length Molding 60831 -- This product stands 1/4" higher than our edge molding, offering a moderately high-profile fiddled edge for cabin tables, counters and similar applications.

Overall height 1-5/8". Overall width 13/16". Cutout 1/2" x 7/8". Per 5' length.

Teak Molding Shipping Charges

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak molding order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- When the actual shipping & handling cost is less than the estimated cost you're charged while placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the additional cost.

Package Length Really Matters

Shipping costs for teak molding sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains small pieces such as quarter-round molding and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak molding shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order shows up in excellent condition.