1/2" Asian Teak Lumber Up To 6' And Longer And 6"+ Wide -- All Excellent Quality And Ready To Use.

These marine grade Asian teak boards are surfaced all four sides (S4S) and are all First European Quality lumber, which is the highest commercial quality available. Thickness is a full 1/2", and lengths and widths are accurate to within 1/16".

• Standard Widths: 1/2" - 3/4" - 1" - 1-1/2" - 2" - 3" - 4" - 5" - 6"
• Standard Lengths: 1' - 2' - 3' - 4' - 5' - 6'
• Boards longer than 6' available on request

Our 1/2" thick milled teak lumber provides a source for creating everything from small trim strips to shelf fiddles and shelves, or boards you can use to fabricate teak face plates, drawer fronts, doors, and a variety of cubbys, cabinets and enclosures on your boat.

Other Milled Dimensional Teak Thicknesses:

• 1/4"
• 3/8"
• 1" Nominal
• 2" Nominal

Teak Lumber Shipping Costs

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- If the actual shipping & handling cost is less than the estimated cost you're charged when placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the difference.

Package Length Really Matters

Shipping costs for teak boards sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains thin, narrow boards and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order order shows up in excellent condition.

3' Lengths -- Excellent for edge-banding teak veneer plywood.We mill these solid teak veneer strips here in our shop, in 2 thicknesses and widths up to 7/8". They're easily applied to exposed plywood edges using ordinary wood glue or two-part epoxy, and/or with brass or bronze brads.

Please Note: Minimum Order Of 3 Pieces

Nominal 2" Thick Milled Asian Teak Marine Lumber -- 1' To 5' Long -- Up To 6" Wide.

These dimensional teak boards are surfaced all four sides (S4S). Nominal 2" varies from 1-7/8" to 1-15/16", but we make every effort keep the thickness consistent across multiple boards in a single order. Length and width dimensions are accurate to within 1/16".

We offer a range of standard widths and lengths for our nominal 2" marine teak, all the way from nominal 2" wide x 1' long to 6" wide by 5' long. We usually can also provide S4S boards wider than 6" and longer than 5' on request.

These nominal 2" thick milled teak sizes provide superior quality in ready-to-use dimensional marine lumber for boat owners. And as with all the teak we sell, these nominal 2" thick boards are First European Quality (FEQ) Asian lumber.

Other Milled Dimensional Teak Thicknesses:

• 1/4"
• 3/8"
• 1/2"
• 1" Nominal

Teak Lumber Shipping Costs

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- If the actual shipping & handling cost is less than the estimated cost you're charged when placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the difference.

Package Length Really Matters

Shipping costs for teak boards sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains thin, narrow boards and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order order shows up in excellent condition.

Nominal 1" Thick Marine Teak Lumber In A Range Of Lengths & Widths -- All Top Quality & Ready To Use

These First European Quality marine teak boards are surfaced all four sides (S4S). Nominal 1" thickness varies from 7/8" to 15/16", but we keep the thickness consistent across multiple boards in a single order. Length and width dimensions are accurate to within 1/16".

• Standard Widths: 2" - 3" - 4" - 5" - 6" - 7" - 8"
• Standard Lengths: 1' - 2' - 3' - 4' - 5' - 6'
• We usually can also provide nominal 1" S4S boards wider than 8" and longer than 6' on request. Simply email us at john@buckwoodcraft.com with your requirements.

Our standard milled teak sizes offer a lot of flexibility for creating projects that call for superior quality, ready-to-use marine lumber. And like all the teak we sell, our nominal 1" teak boards are all FEQ Asian lumber that is free of the knots and sap wood common in plantation teak.

Other Milled Dimensional Teak Thicknesses:

• 1/4"
• 3/8"
• 1/2"
• 2" Nominal

Teak Lumber Shipping Costs

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- If the actual shipping & handling cost is less than the estimated cost you're charged when placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the difference.

Package Length Really Matters

Shipping costs for teak boards sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains thin, narrow boards and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order order shows up in excellent condition.

If you're not sure whether the teak we sell will meet your needs or live up to your standards, we're happy to offer a sample of our wood that's representative of what you'd be buying in larger sizes or quantities. You'll typically receive a piece that's 3" - 4" wide x 4" - 5" long or larger in your choice of 1/2", nominal 1" or nominal 2" thick FEQ teak.

Whichever you choose, the price is $5.00, including shipping anywhere in the U.S.A.

Our 1/4" thick teak stock is useful for a variety of small projects, including trim slats and edge banding for plywood that's more substantial than our teak veneer strips.

These 1/4" teak strips are milled from the same First European Quality (FEQ) Asian teak as our regular dimensional lumber, and specified thickness, widths and lengths are actual, not nominal.

Specifications

• Minimum order quantity: 3 pieces
• 1/2", 3/4" & 1-7/8" widths
• 1' - 2' - 3' - 4' - 5' lengths
• Surfaced all 4 sides

Specifications

• 3/8"
• 1/2"
• 1" Nominal
• 2" Nominal

Teak Lumber Shipping Costs

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- If the actual shipping & handling cost is less than the estimated cost you're charged when placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the difference.

Package Length Really Matters

Shipping costs for teak boards sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains thin, narrow boards and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order order shows up in excellent condition.

Our 3/8" marine teak lumber is a good size for meeting a variety of project needs that don't require the structural qualities of 1/2" or 1" stock.

Our thin teak boards are milled from the same First European Quality (FEQ) Asian teak as our regular dimensional lumber -- which means no knots or sap wood. And all listed thickness, widths and lengths are actual, not nominal

Specifications

• --Widths: 1/2" - 1" - 1-1/2" - 2" - 3" & 4"
• --Lengths: 1' - 2' - 3' - 4' - 5'
• --Smoothly surfaced all 4 sides & ready to use.

Other Milled Dimensional Teak Thicknesses:

• 1/4"
• 1/2"
• 1" Nominal
• 2" Nominal

Teak Lumber Shipping Costs

Shipping Estimates Versus Actual Shipping Costs

The shipping cost shown when you place your teak order is an estimate produced by either UPS or the U.S. Postal Service. Sometimes that estimate turns out to be too high, and other times it's too low. Here's what we do in either case:

• If The Estimated Cost Is Too High -- If the actual shipping & handling cost is less than the estimated cost you're charged when placing your order, we promptly refund the overpayment back to your credit card account or your PayPal account. This normally takes 1 or 2 business days to be applied.
• If The Estimated Cost Is Too Low -- We absorb the difference.

Package Length Really Matters

Shipping costs for teak boards sent via UPS (or FedEx) are appreciably higher when the package length is 60" (5') or greater. This is true even when the package contains thin, narrow boards and weighs only a few pounds.

We Minimize Handling Charges

Our handling charges range from a few dollars for small shipments sent in standard boxes, to several dollars for custom-built packages required for large teak shipments, or for packages that require extra protection against damage. In all cases, we try to hold our shipping costs to a minimum while ensuring that the teak you order order shows up in excellent condition.